CARWH 2016: Advancing Research to Improve Work and Health October 16-18, 2016 Toronto
Français
Whole-body vibration (WBV) is associated with adverse health outcomes including low-back pain, driver fatigue, and vehicular accidents. Active suspension seats potentially improve drivers’ health by attenuating WBV exposures. However active suspension seat effectiveness is influenced by a number of factors related to the seat and driving conditions. The objective of this study was to evaluate the efficacy of three commercially-available air-suspension seats in reducing WBV while operating heavy-haul trucks on a typical route.
Seventeen drivers were recruited for this study. Measurements were obtained over forty-one repeated 150 Km trips that combinded on and off-road driving. Trucks were transporting material from mines to a port in British Columbia. Three seats were evaluated: (1) Truck’s existing National Premium (average 12 months old); (2) new Sears Elite; and (3) new Isringhausen 6860/875 NTS. WBV exposures were collected according to ISO 2631 over the full shift. Truck speed and location data were collected using GPS. Average weighed vibration (Aw) and Vibration Dose Values (VDV) were calculated and normalized to eight hours of exposures. The Seat Effective Amplitude Transmissibility (SEAT) was calculated as the ratio of the seat-measured vibration divided by the floor-measured vibration, and differences in WBV exposures examined using repeated measures.
Seat 1 exposures (A(8)=0.58 m/s2) were significantly higher than Seat 2 (0.41 m/s2) and Seat 3 (0.44 m/s2). The SEAT values indicated the three seats reduced WBV exposure between 9 and 25%, but no significant differences in SEAT values across seats were found over the whole route. In off-road conditions at slower speed, there were negligible differences across the three seats. But on paved highways, SEAT values of Seat 2 and Seat 3 were significantly lower than the existing Seat 1, indicating better WBV attenuating performance.
In the study setting, differences in observed seat performance might be expected double the amount of time drivers could operate their trucks before reaching the ISO daily vibration action limits. Seat suspension-based design differences are thought to account for the performance differences.