Background & Objectives In collaboration with an industry safety association (British Columbia Construction Safety Alliance) and the local regulator (WorkSafeBC) we developed a web-based modelling tool that is intended to help occupational health and safety personnel with quantitative risk assessment for respirable crystalline silica (RCS) on construction worksites.
Methods The exposure estimates are derived from a multiple linear regression model that was constructed using a database of 4550 task-based RCS exposure measurements. The database comprised data from peer-reviewed and grey literature, data shared from industry, and 318 field measurements collected at construction sites in 2015. The variable nature of construction work necessitated the use of a task-based model. Results The model estimates uncontrolled exposure for 47 silica-generating tasks, and exposure levels anticipated following standard control interventions. The other variables in the model are: work environment (indoor vs. outdoor), sampling duration, activity sector (e.g. residential, commercial), project type (e.g. new construction, renovation), use of engineering controls, and region. If controlled exposures are above the exposure limit the tool provides advice on respirator selection. Uncertainty is quantified and communicated using a ‘green, yellow, red’ coding system. This simplified approach will allow the tool to inform non-expert users when the level of uncertainty is unacceptable. The tool outputs a formal RCS “exposure control plan” with further information on administrative controls that should be followed to minimize exposures. Where insufficient data are available, users are advised to collect exposure measurements; they will be encouraged to share data to allow the model to be continually updated. Conclusions This tool has several potential benefits. Using the tool can provide user companies with many of the advantages of quantative exposure-based risk assessment including benchmarking, surveillance, and comparitive analysis. It can be used to educate construction employers and employees about RCS, the relative hazard posed by different work activities, and control effectiveness. This work can provide a model for ongoing data collection and analysis for RCS exposure in construction. Since we aim to update the model as new data become available there is potential for continual improvement in risk reduction as new controls can be assessed and added to the database.
|