Abstract Details

Title: Heavy Mobile Equipment Seat Retrofitting to Reduce WBV Exposure – Going from the Field to the Lab to the Field
Authors: Michele Oliver
Session: Preventing Vibration Induced Injury: Findings from the Lab, Field, and Clinic - Armoury, 18 Oct 2016, 10:30 AM - 11:45 AM

Background & Objectives

Operators of heavy machinery are often exposed to whole-body vibration (WBV), however, when companies retrofit machines, seats are usually selected and implemented without testing using specific vibrations that workers will be exposed to. The purpose of this talk will be to describe the results of a series of field to lab to field studies conducted to allow a steel manufacturing company to intelligently retrofit seats in their mobile equipment.

Methods

The first project phase involved obtaining 6-DOF accelerations for five types of mobile machines from the steel making industry. Field profiles were assembled from the ‘worst’ WBV machine for use in the second phase which was conducted in the laboratory. Profiles were implemented while participants sat on each of three heavy equipment seats mounted on a 6 DOF hexapod robot. Following the lab study, Skydex™ fitted Isringhausen seats were installed in three slag pot haulers. Once installed, six-DOF data were obtained from each of the three machines from the seat and chassis.

Results

Following seat installation, vibration total values for Pot Haulers were reduced to 20-38% of the initial field testing values. Comfort levels were improved to (Fairly Uncomfortable) from (Very Uncomfortable and Extremely Uncomfortable). The vibration dose levels at the seat weighted for health were considered to expose operators to below the lowest health risk category indicating that the exposure was not likely to cause adverse health effects. This is a large improvement over the initial field testing where machines exposed operators to the highest health risk category and exposure was likely to cause adverse health effects. Overall, the new seat performed well as evidenced by the low predicted health risk and greatly improved comfort levels over our initial field testing.


Conclusions

Results from phase one of the project revealed elevated chassis and seat vibration levels for five mobile machine types used in the steel making industry. Using field-based vibration profiles, the robot-based laboratory testing successfully informed the cooperating steel company the best seat for retrofitting their machines. The final phase of the project confirmed that the selected seat improved overall vibration exposure and improved comfort.